![](/images/new-backgrounds/1085710/857109x1.webp)
INSTALLATION
NOTE
Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope ¼ inch to
½ inch from
4 Some models are equipped with an anti- tip bracket (Figure 4). Lower it clockwise until it contacts the floor.
some models
To level the cabinet using the front rollers:
1 Remove the toe grille.
2 Use a
Raise
Figure 2 or
3Use adjustable wrench to adjust leveling screws. Lower the leveling screws on each side clockwise until they contact the floor
(Figure 3).
Lower
Bracket
Figure 4 (some models)
WARNING
The
WARNING
When reversing the door swing:
You MUST move the
Raise
Figure 3
5