Water Filter (some models)

The water filter is located at the top right side of the fresh food compartment.

Replacing the Water Filter

In general, you should change the water filter every six months to ensure the highest possible water quality. Water Filter Status on the user interface prompts you to replace the filter after a standard amount of water (200 gallons/757 liters for PureSource 3TM) has flowed through the system.

If your refrigerator has not been used for a period of time (during moving for example), change the filter before reinstalling the refrigerator.

Ordering Replacement Filters

To order your replacement filters, please visit our online store at www.frigidaire.com/store, by calling toll-free at 877-808-4195, or by visiting the dealer where you purchased your refrigerator. Frigidaire recommends that you order extra filters when you first install your refrigerator, and that you replace your filters at least once every six months.

Here is the product number to request when ordering:

PureSource 3TM Water Filter

Part #WF3CB

NOTE

When ordering your replacement filter, please reorder the same filter type that is currently in your refrigerator.

CHANGING THE FILTER

More about your Advanced Water Filter

The PureSource 3TM ice and water filter system is tested and certified to NSF/ANSI Standards 42 and 53 for the reduction of claims specified on the performance data sheet.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Test & certification results:

•Rated Capacity - 200 gallons/757 liters for PureSource 3TM ice and water filter

•Rated service flow - .50 gallons per minute

•Operating Temp.: Min. 33°F, Max. 100°F

•Maximum Rated Pressure - 100 pounds per square inch

•Recommended Minimum Operating Pressure: 30 pounds per square inch

To replace your PureSource 3TM water filter:

It is not necessary to turn the water supply off to change the filter. Be ready to wipe up any small amounts of water released during the filter replacement.

1Turn Off the ice maker power switch.

2Remove the filter by pushing on the end/face of the filter.

3Slide the old water filter cartridge straight out of the housing and discard it.

4Unpackage the new filter cartridge. Using the alignment guide, slide it gently into the filter housing until it stops against the snap-in connector at the back of the housing.

5Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector).

6Press a drinking glass against the water dispenser while checking for any leaks at the filter housing.

Any spurts and sputters that occur as the system purges air out of the dispenser system are normal.

7After filling one glass of water, continue flushing the system for about four minutes.

8Turn On the ice maker.

9Press and hold the Water Filter button on the Ice & Water Dispenser control panel for three seconds. When the display changes from Red to Green, the status has been reset.

27

Page 26 Page 28
Page 27
Image 27
Frigidaire FPHB2899LF4 Water Filter some models, Ordering Replacement Filters, To replace your PureSource 3TM water filter
Page 26 Page 28

FPHB2899LF4 specifications

The Frigidaire FPHB2899LF4 is a standout refrigerator that combines advanced technology with stylish design, making it an excellent choice for modern kitchens. This French door refrigerator is engineered to offer both elegance and functionality, catering to the needs of busy households.

One of its defining features is the Counter-Depth design, allowing it to fit seamlessly into your kitchen layout while providing a built-in look. This design not only saves space but also enhances the overall aesthetic appeal of your kitchen. The stainless steel finish gives it a sleek and sophisticated look, ensuring it complements any décor.

The FPHB2899LF4 boasts an impressive storage capacity, making it perfect for families of all sizes. The flexible shelving system includes adjustable glass shelves, which provide a customizable storage experience for items of various sizes. Furthermore, the Crisper drawers are designed to keep fruits and vegetables fresh longer, thanks to humidity controls.

This model is equipped with advanced cooling technologies such as the EvenTemp cooling system, which ensures that every corner of the refrigerator maintains a consistent temperature. This technology helps prevent hot spots and ensures that food remains fresh regardless of where it is stored.

The refrigerator also includes an external ice and water dispenser, which offers filtered water and ice without having to open the door, adding convenience to daily routines. The dispenser's controls are user-friendly, making it easy to access chilled beverages at any time.

Energy efficiency is another significant feature of the Frigidaire FPHB2899LF4, as it is ENERGY STAR certified. This means it consumes less energy compared to standard models, helping to reduce energy bills and environmental impact.

In terms of smart features, this refrigerator is equipped with Frigidaire's advanced alert system, which notifies users by sound and light if there are temperature fluctuations, ensuring that food storage remains optimal.

With its blend of design, innovative features, and smart technology, the Frigidaire FPHB2899LF4 is an appealing choice for those seeking a reliable and stylish refrigerator that meets modern cooking and food storage demands. Its combination of efficiency and ease-of-use makes it a valuable addition to any kitchen.
Top Page Image Contents