OPERATING INSTRUCTIONS
Status Indicator Lights
The WASHING light comes on at the beginning of cycle and remains on throughout the wash and rinse phases of the cycle.
The DRYING light indicates the drying portion of the cycle. When either drying option is selected.
When the Sanitize option is selected and the criteria is met, the Sanitized indicator will display upon cycle completion and remain on until the door is opened. If the sanitization criteria is not achieved, the indicator will not display. This can happen if the cycle is interrupted or if the sanitization temperature could not be reached due to incoming water temperature signigicantly below 120oF.
The CLEAN light will come on at end of cycle and remain on until door is opened.
In the unlikely event the dishwasher malfunctions, the indicator may display one of the following codes "Er", "uF", "uo", or "CE". If one of these codes are displayed
contact the Frigidaire Customer Care Center at 1-
locating an authorized service technician, if needed.
Sanitze Indicator
PF……………… | Appears in window when |
| dishwasher is first installed, or |
| when power has been |
| interrupted. |
| and NO HEAT DRY indicator |
| lights will also flash. To clear, |
| touch START/CANCEL pad. |
Number of delay start hours. | |
| The last hour will count down |
| in minutes. |
CL……………… | Close dishwasher door. The |
| status indicator lights will also |
| flash to indicate current cycle |
| status. |
HO or Hd…..… | Indicate a water heat delay. |
MINUTES…...… | Number of minutes left in cycle |
| |
| 99 minutes, a small plus sign |
| will appear beside the number |
| of minutes and remain on until |
| time counts below 99. |
NOTE
The time remaining suddenly increase or drop several minutes. This means that the dishwasher received input form the Smart Sensor concerning the soil load and has
automatically adjusted the cycle length.
8