Freestanding Range
FPIF3093L F 30" Induction
Freestanding Range Specifications
•Product Shipping Weight (approx.) – 220 Lbs.
•Single phase 3- or
•Connected Load (kW Rating) @ 240 / 208 Volts = 15.0 / 11.5 kW
•Recommended Circuit Breaker – 40 Amps
•Always consult local and national electric codes.
•Make sure wall coverings around range can withstand heat generated by range.
•Floor beneath range MUST be solid and level.
•Overhead cabinetry should not exceed a 13" maximum depth.
•Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance.
•Range can be installed flush to wall with 0" minimum rear clearance.
•Minimum 1" clearance required from edge of rangetop to nearest combustible wall on either side of range above 36" height.
•Allow 30" minimum clearance between top of cooking surface and bottom of unprotected wood or metal overhead cabinet; or 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
•To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets.
•Follow all dimension requirements provided to prevent property damage, potential fire hazard, and incorrect countertop and cabinet cuts.
Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • | Specifications | |
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • | ||
subject to change. |
FPIF3093L 10/11 | © 2011 Electrolux Home Products, Inc. |
