Frigidaire FPUH17D7K All Freezer, All-FreezerSpecifications, Optional Accessories, Frigidaire

All Freezer

FPUH17D7K F 17 Cu. Ft. Built-In

All-Freezer Specifications

•Product Shipping Weight (approx.) – 229 Lbs.

•An electrical supply with grounded three-prong receptacle is required. The power supply circuit must be installed in accordance with current edition of National Electrical Code (NFPA 70) and local codes & ordinances.

•Voltage Rating – 115V / 60 Hz / 15 or 20 Amps

•Amps @ 115 Volts = 5 Amps

•Always consult local and national electric & plumbing codes.

•Minimum opening of 66" H x 33" W x 25-1/4" D required for single-unit “Built-In Look” installation; 66" W required for double-unit installation. (66" H to be measured from finished floor to underside of soffit or overhead cabinet.)

•Minimum 25-1/4" depth requires recessed electrical outlet and copper water line.

•Remove all wall / floor molding prior to built-in installation.

•When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 140° door swing, providing complete crisper access and removal. (Absolute 4" minimum clearance will ONLY allow for 90° door swing which will provide limited crisper access with restricted removal.)

Note: Optional Trim Kits available for Built-In

All Freezer. For specifications, refer to Trim Kits

Installation page on web.

•Optional Ice Maker Kit (PN # IM501) available for installation.

•Water line for ice maker can enter opening through floor or rear wall. Copper tubing recommended between cold water line and water connection location. Water line tubing recommended is 48" minimum length by 1/4" diameter. Installation of easily accessible shutoff valve in water line required.

•To allow for ease of moving out side-by-side units after installation, 84" minimum length of coiled copper tubing recommended.

•Freezer must be placed on level surface of hard material, same height as flooring. Surface must support approximately 800 lbs. when fully loaded. Unit equipped with 4-point leveling.

•If optional Single or Double Trim Kit is to be used, different cutout dimensions are required. (Refer to cutout dimensions on this page and to Trim Kits Installation Specifications page on web.)

Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.

Optional Accessories

•Single Trim Kit – (PN # ALLFRZKIT).

•Double Trim Kit – (PN # DUOTRIMKIT).

•Ice Maker Kit – (PN # IM501).

FRIGIDAIRE®

USA • 250 Bobby Jones Expressway • Martinez, GA 30907 • 1-800-FRIGIDAIRE • frigidaire.com

CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.caSpecifications subject to change.

FPUH17D7K 05/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.