Frigidaire FPWD2785KF dimensions Warmer Drawer Specifications, Frigidaire

Warmer Drawer

FPWD2785K F 27" Electric

Warmer Drawer Stand-Alone Installation

Warmer Drawer Specifications

•Product Shipping Weight (approx.) – 55 Lbs.

•Voltage Rating – 120V / 450W / 60 Hz / 15 Amps

•Connected Load (kW Rating) @ 120 Volts = 0.5 kW

(For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.)

•Amps @ 120V = 3.8 Amps

•Recommended Circuit Breaker – 15 Amps

•Always consult local and national electric codes.

•Full plywood base required, capable of supporting 100 Lbs.

•Base must be level and cabinet front must be square.

•Warmer Drawer can be used alone, or is approved to be used in combination with any Frigidaire® Wall Oven. (Refer to Combination Installation Specifications and drawing on this page.)

•Warmer Drawer is approved to be used in combination with any Frigidaire® Built-In Microwave and /or Electric Single Wall Oven.

27" Warmer Drawer/27" Single Wall Oven Combination Installation

Warmer Drawer / Wall Oven Combination Specifications

•To support Wall Oven when using in combination with Warmer Drawer, two 3"-wide x 3/4"-thick planks must be installed as a base, capable of supporting 200 Lbs. Do NOT use full base, since planks are necessary to allow for proper air displacement.

Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.

FRIGIDAIRE®

USA • 250 Bobby Jones Expressway • Martinez, GA 30907 • 1-800-FRIGIDAIRE • frigidaire.com	Specifications
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca	subject to change.

FPWD2785K 05/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.