Frigidaire FRA065AT7 Additional Things YOU should Know, Fresh Air Vent Control on some models

Operating Instructions

Operating Instructions

(continued)

TO TURN UNIT OFF: YOU WILL SEE:

DO THIS:

PRESS

ON/OFF BUTTON

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.

The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.

There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having to roll through to select another mode.

The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.

After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.

Fresh Air Vent Control (on some models)

The Fresh Air Vent allows the air conditioner to:

1.Recirculate inside air - Vent Closed (see Fig. 1)

2.Draw fresh air into the room - Fresh Air (see Fig. 2)

3.Exchange air from the room - Vent Open (see Fig. 3)

Figure 1 (VENT CLOSED)

Figure 2 (FRESH AIR)

AUGER WHEELS

(8-WAY)

Figure 3 (VENT OPEN)

Air Directional Louvers

Air directional louvers control air flow direction. Your air conditioner has the louver type described below.

Auger Type

The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed. Rotate the Auger Wheels until the desired Left/Right direction is obtained. Pivot horizontal louvers until the desired Up/Down direction is obtained.

10 2009 Electrolux Home Products, Inc. All rights reserved.