Frigidaire FSE/FSG748GF operating instructions Before Operating Your Dryer, Operating Steps

	OPERATING INSTRUCTIONS	FSEC/FSGC748GF
			FSE/FSG748GF
	AUTOMATIC		AUTOMATIC
	PERM PRESS	NORMAL	REGULAR
		DRY
	NORMAL DRY
			NORMAL
			DRY
	TIMED DRY
MOISTURE SENSOR	REGULAR		AUTOMATIC
	TIMED DRY
INTERIOR DRUM LIGHT	REGULAR		DELICATE
	TIMED DRY
	REGULAR

Before Operating Your Dryer

Read your dryer Owner's Guide. It has important safety and warranty information. It also has many suggestions for best drying results.

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your dryer Owner's Guide before operating this appliance.

Operating Steps

Read Drying Procedures in your Owner's Guide. It explains these operating steps in detail.

1.Prepare items for drying.

2.Check that lint screen is clean and in place.

3.Load the dryer. If desired, add a dryer fabric softener sheet.

4.Close the dryer door.

5.Set Dry Temperature and Cycle Signal controls.

6.Turn cycle selector clockwise to desired setting.

7.Start dryer. Turn the Turn to Start control clockwise to ON. Hold for 1-2 seconds and release.

8.When Cycle Signal control is on, a signal will sound at the end of the cycle.

9.Remove items immediately and hang or fold.

10.Clean lint screen after every load.

Temperature Selection

Always follow directions on fabric care labels.

To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastics, or similarly textured, rubber-like materials. Use Air Fluff-No Heat setting only.

The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM HEAT, andKNITS/DELICATES-LOWHEATtemp-erature settings may be used with any cycle setting. The AIR FLUFF-NO HEAT setting can be used only in the Timed Dry cycle.

AIR FLUFF-NO HEAT setting tumbles the load without heat. Use Air Fluff to freshen clothing, pillows or blankets, or to dust draperies.

Cycle Selection

Turn cycle selector clockwise to desired cycle and setting.

Each cycle ends with a cool down period. The heat automatically turns off and the load continues to tumble during the cool down period. This reduces wrinkling and makes items easier to handle during unloading.

Drying time varies depending on size and dampness of load, weight and fabric type. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time.

(continued, reverse side)

Printed in U.S.A. ∀ Cut along this edge to separate English from other languages. ∀ P/N 131713000 (9803)