OPERATING INSTRUCTIONS |
|
| FWT449GF |
KNITS & |
| PREWASH | REGULAR |
DELICATES | FINAL |
| HEAVY WASH |
SPIN |
| ||
|
|
| |
|
|
| WASH |
WASH |
|
| R I N S E S |
|
|
| |
|
|
| & SPINS |
FINAL |
|
|
|
SPIN |
|
|
|
|
|
| FINAL |
|
|
| SPIN |
|
|
| PULL TO START/ |
PERM PRESS | RINSES |
| PUSH TO STOP |
WASH |
| ||
& SPINS |
| ||
|
|
|
Before Operating Your Washer
Read your washer Owner's Guide. It has important safety and warranty information. It also has many suggestions for best washing results.
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your washer Owner's Guide before operating this appliance.
Operating Steps
Read and follow Washing Procedures in your Owner's Guide. It provides detailed information for preparing the wash load and choosing control settings to ensure best washing results.
1.Sort laundry into loads that can be washed together.
2.Prepare items for washing.
3.Pretreat stains and heavy soil.
4.Add laundry load to the wash drum.
5.Open the dispenser drawer and add the measured amount of detergent to the detergent compartment. If desired, add liquid bleach and fabric softener to the appropriate compartments. Slowly close dispenser drawer. The washer will not operate with the drawer open.
6.Set Wash/Rinse Temperature according to fabric type and soil level of each load.
See Control Settings Chart (reverse side) for more information on suggested water temperatures.
7.Select desired Cycle Signal volume.
8.If desired, select Extra Rinse in the Regular or Perm Press cycle.
9.Push in the cycle selector knob and turn it clockwise to the desired wash cycle. See Cycle Selection (reverse side) for cycle descriptions and the Control Settings Chart for suggested cycle settings.
10.Start the washer by closing the door and pulling out the cycle selector knob. The washer will not operate with the door open. As a safety measure, the door will automatically lock during the entire wash cycle.
•To stop the washer, push in the cycle selector knob.
•To change a cycle, push in the cycle selector knob and turn it clockwise to the desired setting.
•Pull out the knob to restart the washer.
11.Remove items when cycle ends. When the Cycle Signal control is on, a signal will sound at the end of the cycle.
Note: From time to time you may see water in the bleach and fabric softener compartments. This is a result of the siphoning action and is part of the normal operation of the washer.
(continued, reverse side)
P/N 131771500 (9805)
Printed in U. S. A.
Cut along this edge to separate English from other languages.
