Water Dispenser & Ice Service
WATER DISPENSER
Your refrigerator includes an automatic water dispenser on the front of the refrigerator door. The dispenser is designed to accommodate containers up to 7½ inches high.
Dispensing
Button
Dispensing
Spout
Dispenser Lock
The water dispenser includes a switch that allows you to disable the water dispenser.You can use this lock to prevent accidental spills, such as those caused by children pressing the dispensing button without a glass. The switch is located below the locked/unlocked symbols on the dispenser face plate.
Dispenser
LockDispenser Lock
Drip Tray
Water Dispenser
Dispensing Water
To operate the water dispenser, press a drinking glass against the dispensing button. Hold the glass as far up as possible, ensuring that the water dispensing spout is inside the lip of the glass.
To stop dispensing water, pull the glass away from the dispensing button. For colder water, first add ice to your drinking glass.
Drip Tray
The drip tray located at the base of the dispenser catches small spills and allows them to evaporate. This tray is removable for easy cleaning.
NOTE: Please do not pour excess water or ice into the drip tray. It does not have a drain.
How the Water Dispenser Works
The water tank, located inside the refrigerator door, automatically fills as water is dispensed. For proper dispenser operation, the recommended supply water pressure should fall between 20 psi and 100 psi.
Water pressure must not exceed 100 lbs. Excessive pressure may cause water filter to malfunction.
After the refrigerator is connected to the water supply, fill the water tank by drawing one glass of water. It may take about 1½ minutes after activating the dispenser button before water begins to fill this first glass. Continue flushing the system for 3 minutes to rid the tank and plumbing connections of any impurities.
12
