Under-Cabinet Hood
PL36WC41E C 36" Wall Mount
|
|
|
|
| Exhaust Options |
|
| ||
|
|
|
|
| Vent hood can be vertically or horizontally |
| |||
|
|
|
| ducted outside using round or rectangular duct; or | |||||
|
|
|
|
| recirculated inside with no ducting required. |
| |||
|
|
|
|
| For detailed duct preparation and installation |
| |||
|
|
|
|
| specifications, refer to installation |
| |||
|
|
|
|
| instructions on web. |
|
| ||
|
|
|
|
| Outside Vertical – 7"Round Duct |
| |||
|
|
|
|
|
| Cabinet Bottom |
|
| |
|
|
|
|
| 16 15/16" | 16 15/16" |
|
| |
|
| 36" |
|
| 8"dia.cutout | 7 1/2" |
|
| |
|
|
|
| 9" | for 7"round |
|
| 9" | |
| Minimum 24"- 30" |
| duct |
| 2" |
| |||
13" | allowed from cooking surface |
|
|
| 5" |
|
| ||
| 11/2" |
|
|
| 11/2" | ||||
max. | to top of hood |
|
|
|
|
| |||
cabinet |
|
|
| Electrical access hole (in cabinet bottom) |
| ||||
depth |
|
|
|
| |||||
|
|
| Wood filler strips (recessed cabinet bottoms only) | ||||||
|
|
|
| ||||||
|
|
|
| Outside Vertical – 3 1/4" x 10"Rectangular Duct | |||||
|
|
|
|
|
| Cabinet Bottom |
|
| |
|
|
|
|
| 16 15/16" | 16 15/16" |
|
| |
|
|
|
|
| Vertical |
| 7 1/2" |
|
|
|
|
|
| 9" | duct | 1 | 1 | 2" | 9" |
|
|
|
| cutout | 5 /4" | 5 /4" 5" | |||
|
| Top or rear power |
| 11/2" | 11/4" |
|
| 11/2" | |
3 | 1/4" x 10" Rectangular |
|
|
|
|
| |||
duct location (rear) | supply locations |
| Electrical access hole (in cabinet bottom) |
| |||||
7" Round or |
|
|
|
| |||||
|
|
| Wood filler strips (recessed cabinet bottoms only) | ||||||
3 1/4" x 10" rectangular |
| 20" | |||||||
|
|
|
|
|
|
| |||
duct location (top) |
| Outside Horizontal – 3 1/4" x 10"Rectangular Duct | |||||||
|
| ||||||||
|
|
|
| 3/8" |
| Cabinet Front |
| 3/4" | |
|
|
|
|
|
|
|
| ||
7 1/4" |
|
|
|
| 3 3/4" |
| 1/8" |
|
|
|
| 36" |
| Wood filler strips | 51/4" | Electrical |
| ||
|
|
|
|
| Horizontal | 51/4" | access hole | ||
|
|
|
|
| duct cutout (in wall) | 7 1/2" | (in wall) |
|
Under-Cabinet Hood Specifications
•Product Shipping Weight (Approx.) – 32 Lbs.
•
•Ventilation system is preset to recirculate air inside with no ducting system required. Exhausting air outside is optional, using either vertical or horizontal ducting system. (Refer to Ducted Option Specifications for outside ventilation.)
•Sones Rating – 4.5
•Voltage Rating – 120V / 60 Hz / 15 Amps
•Connected Load (kW Rating) @ 120 Volts = TBD
(For use on adequately wired 120V, dedicated circuit having
•Amps @ 120 Volts = 3.0 Amps
•Always consult local and national electric codes. Check local building codes for installation requirements, as they may vary per locale.
•Connect vent hood with copper wire only.
•Minimum installation height allowed from top of hood to cooking surface is 24" - 30".
•To improve performance, optional
•Installation on
Ducted Option Specifications
•For outside ventilation.
•Exhaust Duct Required –
•For most efficient airflow exhaust, use a straight run or as few elbows as possible.
•Use metallic flex ducting only to connect rigid duct directly to transitions (if allowed by code).
•Thermal breaks such as short section of nonmetallic duct, should be used in areas of extreme cold.
•Cold weather installations should have additional backdraft damper installed.
•Refer to installation instructions on web for detailed duct preparation and converting exhaust vent blower system for exterior exhaust ventilation.
Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.
Optional Accessories
•
•
•Damper Kit
•
Accessories information available on the web at frigidaire.com
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • | Specifications | |
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • | ||
subject to change. |
PL36WC41E 01/11 | © 2011 Electrolux Home Products, Inc. | Printed in the U.S.A. |