CLEANING AND CARE

CHARCOAL FILTER

Charcoal Filter, which was enclosed with your microwave oven, is used for nonvented, recirculated installation. The filter should be changed every 6 to 12 months depending on use.

1.Disconnect power to the microwave oven at the circuit breaker panel or by unplugging.

2.Remove the louver mounting screws.

3.Pull the louver away from the unit.

4.Change the charcoal filter.

5.Carefully push the louver back into place and replace the screws removed in step 2.

Oven light

Charcoal filter

 

 

 

 

 

Hood louver

Bottom tab

MICROWAVE OVEN LIGHT

WORK LIGHT AND NIGHT LIGHT

1.To replace light bulbs, first disconnect power to the microwave oven at the circuit breaker panel or by unplugging.

2.To release cover, remove the screw on the light cover. (See illustration.)

3.Replace light bulbs with equivalent watt bulb available from parts distributor. Bulbs are also available at most hardware stores or lighting centers. DO NOT USE A BULB LARGER THAN 30 WATTS.

4.Close light cover and secure with screw removed in step 2.

Light cover may become very hot. Do not touch glass when light is on.

Light cover

Screw

Light bulbs

 

 

Remove the louver per instructions 1-3 above and charcoal filter, if used.

1.To replace light bulb, first disconnect power to the microwave oven at the circuit breaker panel or by unplugging.

2.Open light cover located behind filter mounting by carefully pulling up on the front edge.

3.Remove old light bulb and replace only with equivalent watt bulb available from parts distributor. Bulbs are also available at most hardware stores or lighting centers. DO NOT USE BULB LARGER THAN 30 WATTS.

4.Replace the microwave oven light cover by carefully pushing into place. Replace the charcoal filter, if used. Push the louver back into place (engaging both the bottom and top tabs) and replace the louver mounting screw.

19

E

Page 19
Image 19
Frigidaire CPLMZ169, PLMVZ169, CGLMV169 Charcoal Filter, Microwave Oven Light Work Light and Night Light