20

Care and cleaning

 

Optional Charcoal Filters

If the model is not vented to the outside, the air will be recirculated through disposable charcoal filters that help remove smoke and odors.

The charcoal filters cannot be cleaned. They must be replaced.

The charcoal filters are clipped inside of each metal grease filter (mounting instructions included with charcoal filters kit).

The charcoal filters should be replaced every 4-6 months (depending on hood usage). NOTE: DO NOT rinse, or put charcoal filters in an automatic dishwasher.

NOTE: Charcoal filters are not included with the hood. They must be ordered from your supplier.

Order the needed kit specifying your hood model and width size.

Charcoal filter placement (Recirculating accessories)

Fit the charcoal filter mattress on the upper side of each grease filter. Use provided springs to fix it in place.

Note: When removing for replacing for a new one do not remove Fixing Springs, simply pull out and rotate outwards.

Cleaning

•Always use the mildest cleaner that will do the job. Use clean, soft cloths, sponges or paper towels.

•Rub stainless steel finishes in the direction of the grain. Wipe area dry to avoid water marks.

•After cleaning, place all parts in their proper positions before using.

The cleaners recommended below indicate a type and do not constitute an endorsement. Use all products according to package directions.

Hood Surface

Painted Surfaces: For general care, wipe the outside of the hood with sudsy water or household cleaners such as Fantastic or Formula 409, rinse well and dry with a clean soft cloth to avoid water marks.

Stainless Steel Surfaces: Wipe and dry stainless steel in the same direction as the grain. Avoid using too much pressure, which may mar the surface. To

remove finger prints and give added shine, use cleaners such as Stainless Steel Magic. Do not allow any cleaning compounds to remain in contact with stainless steel for extended periods.

Plastic surfaces: Wipe with a moist soapy sponge. Rinse and dry.

Aluminum Mesh Filters: Clean filters in the dish- washer or by agitating in sudsy water. Ensure that there is no soil trapped in the fine mesh. Dry the filters before reinstalling them.

Anodized Aluminum surfaces: Top cap is not remov- able. Wash top and underside with hot sudsy water. Rinse and wipe dry or apply Fantastic® or Formula 409® first to a clean sponge or paper towel and wipe clean. DO NOT USE powdered cleansers or steel wool pads.

Page 19 Page 21
Page 20
Image 20
Frigidaire RH30WC60GS, EI36WC60GS Optional Charcoal Filters, Charcoal filter placement Recirculating accessories, Cleaning
Page 19 Page 21

EI36WC60GS, EI30WC60GS, RH30WC60GS, 316488522, RH36WC60GS specifications

Frigidaire has long been recognized for its commitment to quality, innovation, and reliability in kitchen appliances. Among its wide range of products, the Frigidaire RH36WC60GS, RH30WC60GS, EI30WC60GS, and EI36WC60GS stand out as pinnacle offerings in the realm of wall-mounted range hoods. Each of these models delivers a blend of advanced features and technologies designed to enhance both functionality and aesthetics in the kitchen.

The RH36WC60GS model is a 36-inch professional-style wall hood that showcases Frigidaire’s trademark focus on performance and design. It comes with powerful ventilation capabilities, featuring a 600 CFM motor to effectively eliminate smoke, steam, and odors from cooking. This model operates at multiple speeds, allowing users to select just the right level of airflow for their cooking needs. Its sleek stainless-steel finish is not only visually appealing but also easy to clean, making it an ideal choice for modern kitchens.

Similarly, the RH30WC60GS is a 30-inch model that adopts the same high standard of engineering. It mirrors the robust performance characteristics of the larger RH36WC60GS but is designed to fit smaller spaces without compromising on efficiency. The unit is equipped with a dishwasher-safe grease filter, enhancing maintenance ease and ensuring long-lasting performance.

The EI30WC60GS and EI36WC60GS are additional offerings that further exemplify Frigidaire's innovative spirit. These models come with sophisticated technologies such as an advanced LED lighting system, which illuminates the cooking area while being energy-efficient. Both models also include a quiet mode feature to minimize noise pollution without sacrificing ventilation power, a key selling point for busy households.

All four hoods provide compatibility with Frigidaire’s proprietary air quality monitoring systems, allowing users to maintain an optimal cooking environment. Their sleek, contemporary designs seamlessly integrate with a variety of kitchen styles, ranging from traditional to ultra-modern.

In summary, the Frigidaire RH36WC60GS, RH30WC60GS, EI30WC60GS, and EI36WC60GS range hoods combine powerful ventilation, ease of maintenance, and modern aesthetics. These characteristics make them indispensable tools for any culinary enthusiast, ensuring clean air and a pleasant cooking experience. Whether in spacious gourmet kitchens or compact cooking spaces, these hoods stand ready to enhance the cooking environment.
Top Page Image Contents