Frymaster CMIII.5 manual Boil Feature

Programming The CMIII.5 Computer (cont.)

7. will now appear in the left display. A previously entered cook-time will appear in the

right display. If that time is correct, press the switch. If you wish to change the time, enter the desired time in minutes and seconds. (The new time will be displayed in the left display.)

Press the switch to advance to the next option.

8. now appears in the left display. The previous shake time (if any) will appear in the right display. If a product requires shaking during the cooking process, set the shake time by pressing

the number of minutes to cook before shaking. Press the switch to advance to the next

option. If no shake time is required, press "0" and press the switch. Example: Total cook time 3:00 minutes, shake after cooking 1:00 minute.

At the end of 1:00 minute, a beeper will sound and the product button indicator will flash for three seconds.

9. will now appear in the left display. Set the time to hold the cooked product from 13

seconds to 60 minutes. Press the switch. If you do not wish to use the hold time, enter "0"

and press the switch.

10. will appear in the left display. If you desire to program more products, return to Step 5.

If no more programming is required, lock in program by pressing the switch.

14. will now appear in the left display. A previously entered cook-time will appear in the

right display. If that time is correct, press the switch. If you wish to change the time, enter the desired time in minutes and seconds. (The new time will be displayed in the left display.)

Press the switch to lock in the setting.

Boil Feature

CAUTION

Do not drain water or boil-out solution into the filtration system (if applicable). Irreparable

damage will result and void the warranty.

1.Before switching the fryer "ON", close the frypot drain valve. Fill empty frypot with mixture of cold water and detergent. Follow detergent instructions when mixing.

NOTE: When the computer is configured for a split-vat fryer, Boil Mode will not turn on both sides of the computer. Each side will have to be turned on and placed in Boil Mode separately.

2. To program computer for Boil Feature, press either switch.

2. Press the switch. will appear in the left display.

5