Manuals / Frymaster / Kitchen Appliance / Fryer

Frymaster YSCFC24GSERIES manual Calibrating the Thermatron Temperature Controller

Models: YSCFC24GSERIES

1 50
Download 50 pages 62.87 Kb
Page 10
Image 10

YSCFC SERIES FLATBOTTOM GAS FRYERS

CHAPTER 1: SERVICE PROCEDURES

5.To adjust burner gas pressure, remove the cap from the gas valve regulator and adjust to correct pressure (arrow shown at right).

6.Place the fryer power switch and the gas valve in the "OFF" position. Remove the pressure-measuring device fitting from the pressure tap hole and reinstall the pressure tap plug.

1.5Calibrating the Thermatron Temperature Controller

1.Ensure the fryer ON/OFF switch is in the "OFF" position. Fill the frypot to the proper oil-level line with cooking oil/shortening. If solid shortening is used, ensure that the shortening is properly packed and melted in the frypot before proceeding.

Non-CE Electronic Ignition Valve

2.Place the fryer ON/OFF switch in the "ON" position. Set the Thermatron dial to 325°F (162°C).

3.Allow the oil/shortening to stabilize at setpoint temperature. This is evident when the burners have cycled on and off several times.

4.Insert a thermometer or pyrometer into the frypot within ½ inch (1.25 cm) of the probe tip. Ensure the tip of the thermometer/pyrometer does not touch the bottom or sides of the frypot.

5.If the temperature on the thermometer is higher or lower than 325°F (162°C), the dial is out of calibration.

6.Calibrate the dial by first loosening two setscrews in the dial (arrows). After loosening both setscrews, slowly turn the dial to match the temperature reading of the thermometer. Tighten each setscrew, ensuring the dial does not move on the shaft during tightening.

7.Allow burners to cycle on and off several times, then recheck oil temperature as described in step #5. If the Thermatron dial temperature matches the thermometer temperature, the controller is calibrated. If not, repeat step #7.

8.After calibration is complete, place the fryer power switch in the "OFF" position and disconnect the fryer from the electrical supply.

Loosen two setscrews in dial (arrows) to recalibrate controller.

1-5

Page 9 Page 11
Page 10
Image 10
Frymaster YSCFC24GSERIES manual Calibrating the Thermatron Temperature Controller
Page 9 Page 11

YSCFC24GSERIES specifications

The Frymaster YSCFC24GSERIES is a state-of-the-art commercial fryer designed for high efficiency and durability. This unit is ideal for restaurants, food trucks, and other food service environments that require fast and reliable frying capabilities. With a focus on both performance and safety, the YSCFC24GSERIES stands out as a go-to option for culinary professionals.

One of the key features of the YSCFC24GSERIES is its advanced heat management technology. The fryer utilizes a high-efficiency, gas-fired heating system which quickly reaches the desired frying temperatures. This reduces recovery time between batches, allowing chefs to maintain optimal frying conditions even during peak service hours. The unit is equipped with a powerful thermostat that ensures precise temperature control, which is vital for consistent frying results.

In terms of structure, the YSCFC24GSERIES is built with a stainless steel exterior and polished tank, offering durability and resistance to corrosion. This makes it easy to clean and maintain, which is important in a fast-paced kitchen environment. The unit also features a large-capacity fry pot, allowing for substantial frying operations, accommodating both high volume and diverse menu options.

Safety is a top priority in the design of the YSCFC24GSERIES. The fryer includes an automated shut-off feature in case of overheating, as well as a built-in filtration system that helps to maintain oil quality. This not only prolongs the life of the oil but also ensures better taste and reduced cooking odors. Additionally, the fryer has cool-to-the-touch handles and a safety interlock system to prevent accidents during operation.

The YSCFC24GSERIES is also designed with user-friendliness in mind. With easy-to-use controls, operators can quickly adjust temperatures and cooking times without extensive training. The digital display provides clear readings of current settings, making it straightforward to manage multiple frying processes simultaneously.

Furthermore, the Frymaster YSCFC24GSERIES prides itself on energy efficiency. The engineering behind its design ensures that excessive energy consumption is minimized, resulting in environmental benefits as well as cost savings on utility bills.

In summary, the Frymaster YSCFC24GSERIES is a powerful and reliable fryer that combines cutting-edge technology with user-friendly features. Its robust construction, smart safety mechanisms, and energy-efficient operation make it an essential tool for food service professionals looking to enhance their kitchen efficiency and deliver high-quality fried foods.