38
1Replace the battery with a new one.
2Press the POWER button.
3Remove the film, and load an unexposed roll.
●Remove the battery momentarily, then reload it.
●Be sure not to move the camera back lock while
film is loaded in the camera.
●Load the film correctly.
●Cancel the date correction mode.
9
9
14
27
27
14
10
1“ ” symbol is blinking.
2Power switch is not on.
3“ ” is lit on the exposure counter.
●Did you remove film without rewind-
ing it after you began photographing?
●Did you move the camera back lock
during photographing or prewind-
ing?
●Did you load the film properly?
●Is the date correction mode on?
The shutter release
won’t trip.
The numerals on the
exposure counter blink.
After loading the film it
rewound immediately.
The film rewound during
photographing.
After loading the film and
closing the back cover,
the exposure counter
does not advance.
The self-timer cannot be
set.
TROUBLE SHOOTING
During operation

Problems Possible Causes Solutions Page