6564
Notes on Using Your Camera Correctly

■ Places to Avoid

Do not store or use the camera in the following types of
locations:
●Very humid, dirty or dusty places
●In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer.
●Extremely cold places
●Places subject to strong vibrations
●Places affected by smoke or steam
●Places subject to strong magnetic fields (such as places
near motors, transformers or magnets)
●For long periods in contact with chemicals such as
pesticides or next to rubber or vinyl products

■ Do not expose the camera to sand.

The FinePix1300 is particularly and adversely affected by
sand. In sandy locations such as beaches or deserts, or in
locations where there is wind borne sand, ensure that the
camera is not exposed to sand. This can cause faults that
may be irreparable.

■ Notes on Condensation

If the camera is carried suddenly from a cold location into a
warm place, water droplets (condensation) may form on
the inside of the camera or on the lens. When the
viewfinder lamp is lit orange or flashing orange, this
indicates that data access is in progress. Condensation
may also form on the SmartMedia card. In this event,
remove the SmartMedia and wait a short time before using
it again.

■ When the Camera is Unused for Long Periods

If you do not intend to use the camera for a long period, of
time remove the batteries and the SmartMedia card before
storing the camera.

■ Cleaning Your Camera

●Use a blower brush to remove dust from the lens and
LCD surface and then wipe lightly with a soft, dry cloth. If
any soiling remains, apply a small amount of lens
cleaning liquid to a piece of Fujifilm lens cleaning paper
and wipe gently.
●Do not scratch hard objects against the lens, LCD
monitor screen or viewfinder as these surfaces are easily
damaged.
●Clean the body of the camera with a soft dry cloth. Do not
use volatile substances such as thinners, benzine or
insecticide, as these may react with camera body and
cause deformation or remove the coating.

■ When travelling overseas

Do not place your camera in the check-in baggage.
Baggage handling at airports may subject baggage to
violent shocks, and the camera may be damaged internally
even when no external damage is visible.
eBe sure to read this information in conjunction with “Safety Notes” (➡P.76) prior to use, to ensure that

you use your camera correctly.

Explanation of Terms
AE Lock: Press the shutter button down halfway to lock the exposure settings and enable AE Lock.
Using AE Lock allows you to change the composition of your shot after you set the exposure,
and still get excellent results.
Auto Power Off Function:
If the camera is not used in any way for two minutes or more, the Auto Power Off function
switches the camera off. This is to prevent battery depletion and to avoid wasting power when
the camera is connected to the AC power adapter. Auto Power Off does not operate when the
Auto Power Off function is disabled or a USB connection is used.
DPOF: Digital Print Order Format
DPOF is a format used for recording information on a storage media (image memory card, etc.)
that allows you to specify which of the frames shot using a digital camera are printed and how
many prints are made of each image.
EV: A number that denotes exposure. The EV is determined by the brightness of the subject and
sensitivity (speed) of the film or CCD. The number is larger for bright subjects and smaller for
dark subjects. As the brightness of the subject changes, a digital camera maintains the amount
of light hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the
light is halved, the EV decreases by 1.
JPEG: Joint Photographics Experts Group
A file format used for compressing and saving color images. The compression ratio can be
selected, but the higher the compression ratio, the poorer the quality of the expanded image.
White Balance: Regardless of the type of lighting, the human eye adapts so that a white object still looks white.
On the other hand, devices such as digital still cameras register a white subject as white by first
adjusting their internal color balance to match the color of the ambient light around the subject.
This adjustment process is referred to as matching the white balance. A function that
automatically matches the white balance is called an auto white balance function.