26
UNLOADING THE FILM OR REMOVING FILM IN MID-ROLL
To Unload the Film
After the last frame on a roll of film has been exposed, the film is automatically
rewound.
∗If the camera back should accidentally open during shooting, do not remove the film. Instead,
close the back and leave your film as is. When the back is closed, the film continues to rewind
automatically: this protects all the frames on the roll from exposure to light except the last
picture made.
Check to make sure the exposure counter shows “ ”.
•To make sure that your roll of film which has been completely exposed is not accidentally
exposed to light, make sure the exposure counter reads “ ” before opening the camera’s back
cover.
•If the film is removed before the exposure counter reads “ ”, the next roll of film loaded will
rewind immediately and the numerals on the exposure counter will blink.
1