7
LOADING THE BATTERY
Your camera uses one 3V lithium battery
CR123A/DL 123A or the equivalent.
To load the battery.
1Open the battery compartment cover by inserting a small tool into the cover slot.
2Insert the battery following instructions in the diagram on the inside of the battery cover paying
particular attention to the position of the , and . poles of the battery. The battery must be
inserted the right way or the camera will not operate.
3When battery is inserted properly, close the battery compartment cover snapping it securely.
∗Do not apply excessive force when opening the battery cover.
∗One lithium battery should be sufficient for approximately 200 exposures (based on our test conditions).
∗When traveling, take extra batteries to provide power for extra exposures, particularly important if you
visit areas where fresh batteries may be difficult to obtain.
∗Check the battery capacity symbol before using your camera. (→p.8)
∗After changing battery, reset the date to assure accurate date/time recording. (→p.9)
∗Do not load film before insertng the battery into the camera.
2
1
3