The Setup Menu
| RTRACKING DATA | (defaults to OFF) |
Select ON to record GPS data to a log fi le on the memory card (P29; be sure the clock is set to the correct time and date as described on page 18). A new log fi le is created when ON is selected and once every 24 hours thereafter. Note that the camera will continue to update GPS data even when off, increasing the drain on the battery. Choose OFF to disable GPS tracking.
QGPS logs can be viewed in MyFinePix Studio. Q See “GPS” (P31) for information on using GPS.
Q The indicator lamp glows orange during recording GPS data even when the camera is turned off while ON is selected. Select OFF before removing the battery or memory card. Failure to observe this precaution could damage the card.
Q Signal strength will be displayed in yellow and GPS data will not be logged if the battery is low (Bor less), no memory card is inserted, or the memory card has less than 32 MB free. To resume the log, select ON after inserting a charged battery or a memory card with more than 32 MB free.
Q GPS tracking may be interrupted during movie recording and playback.
| RLOCATION INFO | (defaults to ON) |
Select ON to display GPS data. |
|
Choose the units used for GPS information from km (m) (kilometers and meters), mi (ft) (miles and feet), or mi (yd) (miles and yards).
Menus | 83 |