Shooting Mode

6 Press MENU/OK to save the picture.

3Cautions

•Panoramas are created from multiple frames. The camera may in some cases be unable to stitch the frames together perfectly.

•The desired results may not be achieved with mov- ing subjects, subjects close to the camera, unvarying subjects such as the sky or a field of grass, subjects that are in constant motion, such as waves and wa- terfalls, or subjects that undergo marked changes in brightness. Panoramas may be blurred if the subject is poorly lit.

For Best Results

For best results, be careful not to tilt the camera backward or forward or to either side and try not to move the camera while yand + are aligned to form a solid circle.

Printing Panoramas

Depending on the page size and the size of the panorama, panoramas may print with their edges cropped out or with wide margins at the top and bottom or at both sides.

Framing Panoramas Manually

Follow the steps below if the desired results are not achieved with CAUTO selected for PMODE:

1Select DMANUAL for PMODE in the shooting menu.

2Select a frame and take the first shot.

3Press MENU/OK to display a guide showing an edge of the picture you have just taken. Take the next shot, framing it to overlap with the previous picture.

Guide

Display after 1st shot

Frame next shot

4Repeat Step 3 to take the third shot and then press MENU/OK to display the completed panorama.

5Press MENU/OK to save the picture.

26