Error Possible Causes Remedies

28
ERRORS, POSSIBLE CAUSES, AND REMEDIES

During operation

Exposure counter shows blinking
BG” sign though film cartridge
has been loaded and film cartridge
compartment cover has been
closed.
A cartridge has been inserted, but
the counter is not displayed on the
LCD.
The film will not wind.
The shutter release won’t trip.
The film cartridge compartment
cover cannot be opened.
The film is not rewound even if the
MRC Button is pressed.
Open the film cartridge compart-
ment cover and check the film car-
tridge status mark. Are you using a
film cartridge with a white i(1)
or j(2) cartridge status mark ?
Check to ascertain that the batter-
ies have been inserted after the
cartridge.
qD” symbol is blinking.
wThe power is not on.
eB” is lit on the exposure counter.
Are you attempting to unload the
film carriage in the middle of a roll ?
Were pictures taken with the slide
cover closed?
Unload the film cartridge and load an
unused film cartridge or a film cartridge
with unexposed frames remaining.
The shot will not be taken if the shutter
was operated in this condition. Remove
the cartridge without rewinding, and then
reload it again.
qReplace the battery with a new one.
wTurn on the power by opening the slide
cover and set the camera to the ready-
to-shoot state.
eUnload the film cartridge and load an
unused film cartridge or a film cartridge
with unexposed frames remaining.
Rewind the film with the MRC Button.
Unload the film cartridge after “B
appears in the exposure counter and the
motor stops.
Open the slide cover, then press the MRC
Button again.