9
When the slide cover is opened by sliding it fully in
the arrow direction, the power is turned on, the flash
lamp pops up, the lens advances, and the camera
enters the "Ready-to-Shoot" state. When the slide
cover is closed, the power is turned off.
✻When turning on the power, do not press the lens
with your finger. The camera may malfunction.
✻If the camera is not operated in the “Shoot” state
for 5 minutes, the power is automatically turned
off. If the slide cover is closed, then reopened in
this state, the camera will be set to the “Ready-to-
Shoot” state.
✻When the power is turned off, all functions are
canceled except Red-eye reduction modes.
Fig. 7
TURNING THE POWER ON/OFF