3. INSTALLATION
9.Click to select the installing PICTROGRAPHY (3500, 40002or 4500) in the [Printers:] field and then click the [Next] button. The following is displayed when the file is copied:
10.Click the [Add Port] button.
The following dialog box then opens:
11.Specify the port name as directed below:
Enter a numerical value between 1 and 99 to specify the port name. Although the default port name (numerical value) is displayed, you can change it by entering a new port name (numerical value).
When the port name is determined, click the [OK] button. The following dialog box then opens:
12.Specify the output destination IP address as directed below: Enter the IP address of the PICTROGRAPHY network adapter to specify the output destination, and then click the [OK] button.
[PICTRO TCPx: FUJIFILM PICTRO TCP Port] (x: numerical value entered as the port name) is now added to [Available ports] list.
13.Select [PICTRO TCPx: FUJIFILM PICTRO TCP Port] from the [Available ports] list and then click the [Next] button. The following window then opens:
14.Specify a printer name in the field currently displaying the name of the default printer. You may select any printer in place of the default printer.
If another printer is already installed, you will be prompted as follows: "Use this printer as the default printer?" Select [Yes] or
[No].
After completing printer selection, click the [Finish] button.
15.If installation of the printer driver is complete, the icon for the new printer will appear in the [Printers] folder, as shown below.
16. Restart the computer.
7
