3
6564
bSELF-TIMER PHOTOGRAPHY
1
●
!
Check that the lens is clean. If it is dirty, clean the
lens as described on P.106.
●
!
You can also use the Framing Guideline Function.
(➡P.32)
In the “3”, “7”, “6”, “8”, “4” and “5”
modes, holding down the “SHIFT/r”button
button and pressing “b” on the 4-direction
button switches the mode to self-timer
photography.
Repeat the operation to cancel self-timer mode. Position the AF frame over the subject and
press the shutter button. The camera focuses on
the subject in the frame and self-timer starts to
run.
●
!
You can also use the AF/AE lock (➡P.30).
●
!
Be careful not to stand in front of the camera when
you press the shutter button as this can cause
focusing or light metering errors.
2 3
The self-timer lamp lights for 5 seconds and
then blinks for 5 seconds, then the camera takes
the picture.
●
!
To stop the self-timer, once it has started running,
press the “CANCEL/BACK” button.
4
The time until the shutter releases is shown as a
countdown bar on the LCD monitor and LCD
panel.
Self-timer mode is automatically cancelled after
each shot.
●
!
You can check the countdown on the LCD panel
when the LCD monitor is switched off.