5
99
ADJUSTING THE LCD MONITOR BRIGHTNESS AND THE SPEAKER VOLUME➀If you hold down the “SHIFT/r” button ➁and
press the “DISP” button, the “adjustment bar” is
displayed.
●Adjusting the BRIGHTNESS
You can only adjust the brightness when the Mode
switch is set to either “0” or “1”. However, when
the Mode switch is set to “0”, the brightness cannot
be adjusted if the Mode dial is set to “2”.
●Adjusting the VOLUME
The speaker volume can only be adjusted when the
Mode switch is set to “1”and a movie file is
selected.
➀Press “d” and “c” on the 4-direction button to
adjust the LCD monitor brightness or the
speaker volume. Use “a” and “b” on the 4-
direction button to switch between brightness
and volume. ➁Press the “MENU/EXE” button to
confirm the setting.
2
1
●
!
If movie playback is in progress, playback is paused.
●
!
The settings cannot be changed if the LCD monitor
is switched off.
●
!
To exit this procedure without changing the settings,
press the “CANCEL/BACK” button.
●
➀●
➁
●
➀
●
➁
98
A registration confirmation screen appears. To
register the current selection, press the
“MENU/EXE” button.
●
!
When a new image is registered, the previously
registered image is erased. ●
!
The quality of the displayed startup screen differs
from that of the original image.
If you set “STARTUP SCREEN” in the SET UP
menu to ON, the registered image is displayed
when you switch the camera on.
3