Connecting to a PC

By connecting the camera to a PC, your system can be expanded to fill a wide range of uses. Using “FinePixViewer” performs images saving, browsing and file management etc.

MEMO

If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the AC power adapter when connecting the camera to a PC.

CAUTION

• Do not format the Memory Card in the camera on the

PC.

• Use the Memory Card with images taken by a

FUJIFILM Digital camera.

• When connecting to a PC, if the Memory Card contains

large image or movie files, connection or transmission

may take time or images may not be stored. In these

cases, use the Image Memory Card Reader (sold

separately), etc. Note that the Image Memory Card

Refer to Software Installation (➝p.99, 102) the first time you connect the camera to your PC. Install the software first. Do not connect the camera to the PC before installing all the software.

CD-ROM

(Software for FinePix)

Reader DPC-R1 is not compatible with the SD Memory

Card.

BConnect the camera to your PC using the USB cable (mini-B).

USB socket (mini-B)

AInsert the Memory Card with images into the camera (➝p.22).

You can use the xD-Picture Card and the SD Memory Card with the FinePix A610 and FinePix A805. In this Owner’s Manual, these cards are expressed as “Memory Card”.

AC-3VX (sold separately)

CPress wfor about 1 second to turn the camera on in Playback mode.

Continued Q

Installation Software

105