Connecting to a PC

CAUTION

DSet a PC.

• FinePix A610/FinePix A805 is compatible with PTP

Windows 98 SE / Me / Macintosh

(Picture Transfer Protocol)/MTP (Media Transfer

 

Protocol). A PTP/MTP-compatible camera is a camera

CAUTION

which can recognize the PC and printer automatically

 

when connected.

The Windows CD-ROM may also be required during

• Always use the FUJIFILM AC Power Adapter AC-3VX

installation. In this event, change CD-ROMs as directed

(sold separately). If the camera suddenly loses power

by the on-screen instructions.

during data exchange, the Memory Card or internal

 

memory could be damaged.

• FinePixViewer automatically starts up and the Save

• Do not disconnect the USB cable (mini-B) when the

Image Wizard window (Save Image dialog box)

camera is communicating with a PC. If disconnecting

appears. Follow the instructions provided on screen to

the USB cable (mini-B) during communication, the files

save the images. To proceed without saving the

on the Memory Card or internal memory may cause

images, click the [Cancel] button.

damage.

 

• In Mac OS X, you must set the automatic setup when

 

the first time you connect the camera to your PC.

 

• Make sure that USB cable (mini-B) is connected

 

correctly and pushed in.

 

• Perform pre-arranged steps to disconnect and turn off

 

the camera (➝p.108).

 

• When the camera and PC are exchanging data, the

 

indicator lamp blinks alternately green and orange.

 

• Auto power off is disabled during PC connection.

 

• Before replacing the Memory Card, always disconnect

 

the camera from the PC. See p.108 for information on

 

the disconnection procedure.

 

• The camera and PC may be exchanging data even

 

when “Copying” disappears on your PC screen. Before

 

disconnecting the USB cable (mini-B), always check

MEMO

that the indicator lamp is off.

• You can only see images saved on a PC. Save images

• When Windows 98 SE is used, the supplied software

on a PC.

must be installed first before connecting the camera to

• If you cancel saving by clicking the [Cancel] button,

a PC using the USB cable. The PC will not recognize

press POWER to turn off the camera and then

the camera if it is connected before the installation.

disconnect it from the PC.

 

106