21
Windows
20
NOTE
If you cannot find USB Mass Storage in the “USB Controller” list, look under
“Other devices”.
8. Select the “Driver” tab and click the [Update
driver…] button. This launches the Upgrade Device
Driver Wizard.
9. Select “Display a list of the known drivers for this
device so that I can choose a specific driver” as
the search method and click the [Next>] button.
When the dialog box opens, “Search for a suitable driver for my device
(recommended)” is selected. Change this selection to “Display a list of the known
drivers for this device so that I can choose a specific driver.
10. In the device driver selection window, select USB
Mass Storage in the “Models:” field and click the
[Have Disk…] button.
11. The installation specification dialog box (Install
from floppy disk) dialog box appears. Select
\USBDRV\WIN2KPRO on the CD-ROM drive and
click [OK].
Click the [Browse…] button to simplify the selection.
12. When the device driver selection window reappears,
click the [Next>] button.
13. When the Upgrade Device Driver Wizard reappears,
click the [Next>] button.
14. The Upgrade Device Driver Wizard completion
screen appears. Click the [Finish] button to
complete the driver upgrade.
NOTE
TIP
Updating the USB Driver on a Windows PCUpdating the USB Driver for Windows 98 and Windows Me
1. Switch on your PC and launch Windows 98 or
Windows Me.
2. Insert the CD-ROM provided into the CD-ROM drive.
3. Open the “My Computer” window, double-click
“UNIN_FUM.EXE” in the “\USBDRV\WIN98\UNINST”
folder on the CD-ROM and remove the installed
driver.
Close all files when removing drivers.
4. Install the new driver (See P.7).
Updating the Windows 2000 Professional USB Driver
1. Switch on your PC and launch Windows 2000
Professional.
2. Insert the CD-ROM provided into the CD-ROM drive.
3. Load a media containing photographed images
into the camera and switch the camera on.
4. Use a USB cable to connect the camera to the USB
port on the PC.
5. Open the Control Panel, click “System” and open
the System Properties dialog box.
6. Select the “Hardware” tab and click the [Device
Manager] button.
7. Click “Universal Serial Bus Controller” in the
Device Manager window, then click the right
mouse button on “USB Mass Storage” and select
“Properties” in “Action” menu.
Update the USB Driver in the following situations:
(1)When you want to upgrade the driver version
(2)When you have installed the driver but the software does not run
NOTE