11
GettingReady
1
10
1
2
Load the battery in the correct direction.Check that the camera is turned off before openingthe battery cover.●
!
If opening the battery cover while the camera is still on, the
camera will turn off.
●
!
Do not apply force to the battery cover.
LOADING THE BATTERY AND THE MEDIA
1Getting Ready
Compatible battery
Always use the Rechargeable Battery NP-120(included).The use of other brands of rechargeable batterycould cause faults or damage to the camera.hRechargeable Battery NP-120 1950 mAh (1)●
!
The battery is not fully charged at shipment and must be
fully charged before being used.
●
!
Do not stick labels onto the battery as this could cause the
battery to become jammed inside the camera.
●
!
When removed from the camera, the battery should be stored
and transported in the case provided. Any contact between the
battery terminals could cause the battery to short-circuit and
overheat.
●
!
See P.113-114 for information on the battery.
Indicator
Terminals
Do not open the battery cover while the camera is
on. This could damage the xD-Picture Card or ruin
the image files on the xD-Picture Card.
Make sure that battery does not fall out when loading it.
3
●
!
If the xD-Picture Cardis oriented incorrectly, it will not go all
the way into the slot. Do not apply force when inserting an
xD-Picture Card.
Gold marking
Gold contact areaGold contact areaGold contact areaGold contact areaGold contact area
Example of LCD Monitor text display
■Photography mode
NNN
1/ 1/2005 12:00 AMISOIS O 80ISOIS O 8010-1 23
NNN
NNN
250 F5.6FinePix COLOR
Battery level indicator
Quality mode
Sensitivity
AF warning
Number of available frames
Date / Time
Camera shake warning
AF frame
Photography mode
Macro (close-up)
Exposure compensation
Self-timer
Flash
Continuous shooting
Shutter speed
Aperture
White balance
High-speed shooting
Photometry
Increasing monitor
brightness
NNNN 1/ 1/2005 12:00 AMIS OIS O100-0009
-1 23
NNN
NNN
80
Battery level indicator
Quality mode
Exposure compensation
White balance
Protection
Voice memo
DPOF
Playback mode Frame number
Date / Time
Sensitivity
■Playback mode
Attaching the strap Using the strap
01
02
Attach the strap as shown in 1and 2.When attaching the strap, move the fastener toadjust the length and slightly away from theend of the strap, as shown in figure 1.1Loop the strap over your wrist.2To avoid dropping the camera, secure thestrap around your wrist by sliding thefastener to adjust the length.01
02
Camera parts and features
Continued