Connecting to a PC

Windows XP

AThe “Found New Hardware” help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required.

CAUTION

This step is not required for subsequent connections.

BFinePixViewer automatically starts up and the Save Image Wizard window (Save Image dialog box) appears. Follow the instructions provided on screen to save the images. To proceed without saving the images, click the [Cancel] button.

MEMO

•You can only see images saved on a PC. Save images on a PC.

•If you cancel saving by clicking the [Cancel] button, press Power to turn off the camera and then disconnect it from the PC.

Disconnecting the camera

1 Windows

Once the image has been saved, the window below appears (Save Image Wizard window). To disconnect the camera, click the [Remove] button.

Macintosh

Once the image has been saved, the window below appears. To disconnect the camera, click the [OK] button.

Proceed to “Using FinePixViewer” (➝p.135).

134