144
Warning DisplaysCARD ERROR
• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.113). If the message still
appears, replace the Memory Card.
• Camera fault.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your
camera.
• Contact your FUJIFILM dealer.
• Insert a compatible Memory Card that is
operationchecked at FUJIFILM Corporation.
\ CARD FULL
Y CARD FULL
The internal memory or Memory Card is full. Erase some images in internal memory or Memory
Card (➝p.43), or use a Memory Card that has ample
free space.
WRITE ERROR
• The data could not be recorded due to a Memory
Card error or a connection error between the
Memory Card and camera.
• The image cannot be recorded as it is too large to
fit in the available space on the Memory Card.
• The Memory Card or internal memory is not
formatted.
• Re-insert the Memory Card or turn the camera off
and then on again. If the message still appears,
contact your FUJIFILM dealer.
• Use a new Memory Card.
• Format the Memory Card or internal memory on
the camera (➝p.113).
PROTECTED CARD The SD Memory Card switch is slide to the “Lock”
side.
Unlock the protection by sliding it back (➝p.20).
INTERNAL MEMORY IS
FULL
INSERT A NEW CARD
The data could not be recorded or copied since the
internal memory is full.
Erase some images from the internal memory
(➝p.43), or use a Memory Card that has ample free
space.
r BUSY The timing for recording was incorrect because the
Memory Card was formatted on a PC.
Use an Memory Card that was formatted on the
camera.
FRAME NO. FULL
The frame number has reached 999-9999. AInsert a formatted Memory Card into the camera.
BSet RENEW as the FRAME NO. setting in the
U SET-UP menu (➝p.110).
CStart taking pictures (The frame number starts
from “100-0001”).
DSet CONT. as the FRAME NO. setting in the U
SET-UP menu.
Warning Displayed Explanation Remedy