FujiFilm F480/F485 side, space, Remedy, camera, formatted, free space, Explanation, SET-UP]menu, • Camera fault, [\MEMORY FULL], [YMEMORY FULL], Warning Displays

Warning Displays

Warning Displayed	Explanation		Remedy
	• The Memory Card contact area is soiled.	• Wipe the contact area on the Memory Card with a
	• The Memory Card format is incorrect.	soft, dry cloth. It may be necessary to format the
		Memory Card (➝p.84). If the message still
[CARD ERROR]		appears, replace the Memory Card.
	• Camera fault.	• Contact your FUJIFILM dealer.
	• The Memory Card is damaged.
	• Inserted Memory Card is not compatible with your	• Insert a compatible Memory Card that is operation-
	camera.	checked at FUJIFILM Corporation (➝p.16).
[\MEMORY FULL]	The internal memory or Memory Card is full.	Erase some images in internal memory or Memory
[YMEMORY FULL]		Card (➝p.36), or use a Memory Card that has ample
		free space.
	• The data could not be recorded due to a Memory	• Re-insert the Memory Card or turn the camera off
	Card error or a connection error between the	and then on again. If the message still appears,
	Memory Card and camera.	contact your FUJIFILM dealer.
[WRITE ERROR]	• The image cannot be recorded as it is too large to	• Use a new Memory Card.
	fit in the available space on the Memory Card.
	• The Memory Card or internal memory is not	• Format the Memory Card or internal memory on
	formatted.	the camera (➝p.84).
[PROTECTED CARD]	The SD Memory Card switch is slide to the “Lock”	Unlock the protection by sliding it back (➝p.17).
	side.
[INTERNAL MEMORY IS	The data could not be recorded or copied since the	Erase some images from the internal memory
FULL]	internal memory is full.	(➝p.36), or use a Memory Card that has ample free
		space.
[INSERT A NEW CARD]
[BUSY]	The timing for recording was incorrect because the	Use a Memory Card that was formatted on the
	Memory Card was formatted on a PC.	camera.
	The frame number has reached 999-9999.	AInsert a formatted Memory Card into the camera.
		BSet [RENEW] as the [FRAME NO.] setting in the
[FRAME NO. FULL]		[	SET-UP] menu (➝p.81).
		CStart taking pictures (The frame number starts
		from “100-0001”).
		DSet [CONT.] as the [FRAME NO.] setting in the
		[	SET-UP] menu.

108