12 13

GettingReady
1
TURNING ON AND OFF SETTING THE DATE AND TIME
Open the lens cover to turn the camera on in
Photography mode.
Close the lens cover to turn the camera off.

Move to Photography mode or Playback mode

After purchasing the camera, first time when you
turn camera on, the date and time are cleared.
Press the “MENU/OK” button to set the date and
time.
●
!
To set the date and time later, press the “DISP/BACK” button.
●
!
If you do not set the date and time, this message will appear
each time you turn the camera on.
1
1Press “d” or “c” to select Year, Month, Day,
Hour or Minute.
2Press “a” or “b” to correct the setting.
●
!
Holding down “a” or “b” changes the numbers continuously.
●
!
When the time displayed passes “12:00”, the AM/PM setting
changes.
Once you have set the date and time, press the
“MENU/OK” button. Pressing the “MENU/OK”
button changes the camera to Photography or
Playback mode.
●
!
At the time of purchase and after you leave the camera for a
long period with the batteries removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the batteries have been loaded for 30
minutes or more, the camera settings will be retained for
roughly 3 hours even when the camera has no power
(batteries removed and AC power adapter disconnected).
2
3
0102
Power-OFFPower-ON
Leave the lens cover closed. Press the “Playback” button for approx. 1
second to turn the camera on in Playback
mode.
Press the “Playback” button during playback to
turn the camera off.

Turn the camera on in Playback mode.

Power-ON/OFFClose the lens cover
Open the lens cover to turn the camera on in
Photography mode.
Press the “Playback” button for approx. 1
second during shooting to change to Playback
mode.
Press the “Playback” button for approx. 1
second again to return to Photography mode.
Shooting baPlaybackPower-ON

Turn the camera on in Photography mode

◆Power save function ◆
When this function is active, if the camera is then left unused for 2 or 5 minutes, the Power save
function turns the camera off (➡P.47). To restore power to the camera, close the lens cover and then
hold down the “Playback” button for approx. 1 second.
◆Power save function ◆
When this function is active, it turns off the LCD monitor to reduce power consumption if the camera is
not used for 30 seconds (➡P.47). If the camera is then left unused for 2 or 5 minutes, the Power save
function turns the camera off. To restore power to the camera, briefly close and then reopen the lens
cover.