89
Software Installation
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
Refer to Software Installation (➝p.83, 86) the first time
you connect the camera to your PC.
Install the software first. Do not connect the camera to the
PC before installing all the software.
CAUTION
• Do not format the xD-Picture Card in the camera on
the PC.
• Use the xD-Picture Card with images taken by a
FUJIFILM Digital camera.

Continued

Q

AInsert the xD-Picture Card with images into the
camera (➝p.17).
BPress w for about 1 second to
turn the camera on in Playback
mode.
CPress MENU/OK to open the
SET-UP menu.
Refer to “Using the SET-UP
menu” (➝p.69).
DSelect @ DSC in L USB
MODE in the SET-UP menu
(➝p.71).
EPress POWER to turn the
camera off.
FTurn your PC on.
GConnect the camera to your PC using the USB cable
(mini-B).
USB MODE
THIS MODE IS FOR
SENDING IMAGE DATA
TO PC.
SET CANCEL
PICTBRIDGE
DSC
; USB socket (mini-B)
(sold separately)
AC-3VX