107106
Specifications
hShutter:Variable-speed, 1/4 sec. to 1/2000 sec. (depend
on Exposure mode)
hFlash:Auto flash using flash control sensor
Effective range: Wide-angle Approx. 0.4 m-3.5 m
(15.7 in.-11.5 ft.)
Telephoto Approx. 0.4 m-2 m
(15.7 in.-6.6 ft.)
Flash modes: Auto, Red-Eye Reduction, Forced Flash,
Suppressed Flash, Slow Synchro
hErase modes:ERASE FRAME, ERASE ALL FRAMES,
FORMAT (initialize)
hLCD monitor
1.5-inches, low-temperature polysilicon TFT 114,000 pixels
hSelf-Timer:10 sec. timer clock
hDC Input:To connect the AC power Adapter AC-5VS/
AC-5VHS
h(USB) socket
For file transfer to a computer and connection to the
optional cradle
Power Supplyand Others
Input/Output Terminals
hPower supply
Use one of the following
• Rechargeable Battery NP-60 or AC Power Adapter
AC-5VS/AC-5VHS
■ Available shots using the battery (When fully charged)
The number of shots shown here is an approximate guide
to the number of consecutive shots that can be taken based
on 50% flash usage at normal temperatures. However, the
actual number of available shots will vary depending on the
ambient temperature when the camera is used and the
amount of charge in the battery. The number of available
shots will be lower in cold conditions.
hConditions for use
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
hCamera dimensions(W/H/D)
85.0 mm ×69.4 mm ×27.5 mm/3.3 in. ×2.7 in. ×1.1 in.
(not including accessories and attachments)
hCamera mass(weight):185 g/6.5 oz.
(not including accessories, batteries or SmartMedia)
hWeight for photography:Approx. 215 g/7.6 oz.
(including battery and SmartMedia)
hAccessories:See P.7
hOptional Accessories:See P.89-90
✽
These specifications are subject to change without notice.
✽
The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics
and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
✽ The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static
electricity, line noise, etc.).
✽ Due to the nature of the lens, the edges of photographed images may appear distorted. This is normal and does not
indicate a fault.
Battery Type No. of Shots
NP-60
LCD monitor ON
Approx. 200
Approx. 450
LCD monitor OFF
Display Status
Lit Charging in progress
Charging error
From 10 seconds to 5 seconds before the shot is taken
Recording in progress
During communication with a computer
Charging complete
POWER switch set to ON (goes off after several seconds)
For 5 seconds or less before the shot is taken
For 5 seconds or less before recording ends
Ready for disconnection
Off
Brinking
Lit
Lit
Brinking
Brinking
Flashing rapidly
Brinking
Off
Camera operation
During charging
Switched on
Self-timer
photography
Recording Voice
Memos
Connected to a
computer
■ Self timer lamp display