9796
Warning Displays eThe table below lists the warnings that are displayed on the LCD monitor
Notes on the SmartMedia
hDo not carry SmartMedia in locations such as a
trouser pocket. This could subject the SmartMedia to
excessive force when you sit down, thereby
damaging the SmartMedia.
hThe SmartMedia may feel warm when it is removed
from the camera after extended periods of picture
taking or image viewing. This is normal and does not
indicate a fault.
hInserting a SmartMedia that is charged with static
electricity into your camera may result in a camera
malfunction. If this occurs, switch the camera off and
then on again.
hAffix the label onto the designated area of the card.
Do not use third-party labels as this can lead to
problems when the card is inserted or removed.
hWhen you attach the label, take care that it does not
cover any of the write-protect area.
Notes on Using SmartMedia with a PC
hIf you intend to take photos using a SmartMedia that
has been used on a PC, format the SmartMedia on
your camera.
hWhen you format a SmartMedia in the camera and
then shoot and record images, a directory (folder) is
automatically created. Image data is then recorded in
this directory.
hDo not change or delete the directory (folder) names
or file names on the SmartMedia from your PC as this
will make it impossible to use the SmartMedia in your
camera.
hAlways use the camera to erase image data on a
SmartMedia.
hTo edit image data, copy the image data to the PCs
hard disk and then edit the copied data.
hDo not copy files other than those that will be used by the
camera.
Be sure to use your PCs disk eject function
(right-click the removable disk icon in the My
Computer window and then click Eject) when
you eject a SmartMedia from the PC card reader
or PC card adapter.
When you are using a USB connection, you
should also select and left-click the eject button
for USB disc/mass storage in the taskbar.
If you do not use the correct eject procedure,
the SmartMedia may be damaged due to write-
behind cashing.
Specifications
Type
Image memory card for digital cameras
(SmartMedia)
Operating voltage 3.3V
Conditions for use Temperature:
0°C to +40°C (+32°F to +104°F)
Humidity:
80% or less (no condensation)
Dimensions 37 mm ×45 mm ×0.76 mm
(1.45 in. ×1.77 in. ×0.03 in.) (W ×H ×D)
Warning Displayed Explanation Remedy
(Lit red)
(Blinking red)
The battery in the camera is fully depleted or
very low on charge.
There is no SmartMedia loaded or a 5 V
SmartMedia is loaded the wrong way round.
iThe SmartMedia is not formatted.
iThe SmartMedia contact area is soiled.
iCamera fault.
iThe SmartMedia contact area is soiled.
iThe SmartMedia is damaged.
i
The SmartMedia format is incorrect.
iCamera fault.
The SmartMedia is fully recorded.
Replace the battery or have new battery ready.
Load the SmartMedia (3.3V) in the correct
direction.
iFormat the SmartMedia.
iWipe the contact area on the SmartMedia with
a soft dry cloth. It may be necessary to format
the SmartMedia. If the error message is still
displayed, replace the SmartMedia.
iContact your FUJIFILM dealer.
iWipe the contact area on the SmartMedia with
a soft dry cloth. It may be necessary to format
the SmartMedia. If the error message is still
displayed, replace the SmartMedia.
iContact your FUJIFILM dealer.
Erase some images or use a SmartMedia that
has ample free space.
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. However, a tripod
should be used for some scenes and modes.
The AF (auto focus) cannot work effectively. iIf the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
iUse AF lock to take the picture.
Outside the AE continuous range. The shot can be taken, but the exposure will not
be correct.
\