9594
Notes on the SmartMedia™
Notes on the Power Supply
AC Power Adapter
Use only the AC-5VS/AC-5VHS AC Power Adapter
with your FinePix F401 Digital Camera. The use of
other AC power adapters may result in damage to your
camera.
hThe AC Power Adapter is only intended for indoor
use.
hPush the connection cord plug firmly into the DC input
socket.
hWhen unplugging the connector cord, switch the
camera off and pull out the plug by grasping the plug
itself. (Do not pull on the cord.)
hDo not use the AC power adapter with any device
except the specified device.
hDuring use, the AC power adapter will become hot to
touch, but this is normal.
hDo not disassemble the AC power adapter. Doing so
could be dangerous.
hDo not use the AC power adapter in a place with high
temperature and high humidity.
hDo not drop or subject the AC power adapter to
strong shocks.
hThe AC power adapter may emit a humming noise,
but this is normal.
hIf used near a radio, the AC power adapter may
cause static, so play the radio in a distant place.
✽Very occasionally, DC output will be prevented by the
operation of the internal protection circuit. In this
event, unplug the AC-5VS/AC-5VHS AC power
adapter from the power socket for a few moments
and then plug it in again. This will restore DC output.
■Specifications (AC-5VS/AC-5VHS)
Power Supply AC 100V to 240V, 50/60Hz
Rated Input Capacity 12W (U.S.A. and Canada)
0.15A to 0.24A (other countries)
Rated Output
DC 5.0V 1.5A (U.S.A. and Canada)
DC 5.0V 2.0A (other countries)
Temperature During Use
0°C to +40°C (+32°F to +104°F)
(U.S.A. and Canada)
0°C to +45°C (other countries)
Storage Temperature
-10°C to +70°C (+14°F to +158°F)
Dimensions (MAX.) 47 mm ×20 mm ×72 mm
(1.9 in. ×0.8 in. ×2.8 in.)
(W ×H ×D) (U.S.A. and Canada)
49 mm ×40 mm ×65 mm
(W ×H ×D) (U.K.)
49 mm ×31 mm ×65 mm
(W ×H ×D) (other countries)
Mass (Weight) Approx.120 g (4.2 oz.)
(U.S.A. and Canada)
Approx.200 g (7.0 oz.) (U.K.)
Approx.180 g (6.4 oz.)
(other countries)
Connection Cord Length
Approx. 2 m (6.6 ft.)
✽Please note that specifications and characteristics are
subject to change without notice.
■SmartMedia
The SmartMedia card supplied with your FinePix F401
camera is a new image recording medium developed
especially for use in digital cameras. Each SmartMedia
card contains a built-in semiconductor memory chip
(NAND flash memory) which is used for storing digital
image data.
Because the data is stored electronically, the stored image
data can be erased from the card and new data recorded.
■SmartMedia with IDs
The SmartMedia ID is a SmartMedia that has an
individually assigned identification number. SmartMedia
ID cards can be used with devices that use ID numbers
for copyright protection or other purposes. This camera
accepts SmartMedia ID cards in the same way as
conventional SmartMedia cards.
■Storing Data
In the situations listed below, recorded data may be
erased (destroyed). Please note that Fuji Photo Film
Co., Ltd. accepts no responsibility whatsoever for the
loss (destruction) of recorded data.
✽When the SmartMedia is used incorrectly by the
owner or a third party
✽When the SmartMedia is exposed to static electricity
or electrical noise
✽When the battery cover is opened or the SmartMedia
removed and the camera is then switched off during
data recording, during data erasing (SmartMedia
formatting) or during frame advance when images are
being played back.
You should always back up important files onto
another media (MO disk, CD-R, CD-RW, hard
disk, etc.).
■Notes on Handling SmartMedia
hTake care to hold the SmartMedia straight when you
load it into your camera.
hNever remove the SmartMedia or switch the camera
off during data recording, during data erasing
(SmartMedia formatting) or during frame advance
when images are being played back. These actions
could result in damage to the SmartMedia.
hUse only the SmartMedia specified for use with the
FinePix F401. The use of other SmartMedia could
damage the camera.
hSmartMedia are precision electronic devices. Do not
bend, drop, or subject SmartMedia to excessive
shocks.
hDo not use or store SmartMedia in environments
likely to be affected by strong static electricity or
electrical noise.
hDo not use or store SmartMedia in very hot, humid or
corrosive environments.
hTake care not to touch the SmartMedia’s contact area
or allow the area to become soiled. Use a dry lint-free
cloth to wipe away any soiling that does occur.
hTo avoid damage caused by static electricity, always
use the special static-free case provided during
transportation or storage, or keep the SmartMedia in
a storage case if available.