L310GB.book Page 41 Thursday, January 17, 2008 9:44 PM
ZConnecting
Matters | Problems | Possible causes | Solutions | |
|
| The camera is not connected to the TV | Connect the camera and TV correctly. | |
|
| correctly. |
| |
|
|
|
| |
| There is no image | The included A/V cable was connected | After the movie playback mode is stopped, | |
| during movie playback. | connect the camera and TV correctly. | ||
| or sound on the |
|
| |
Connecting to TV | TV. | “TV” is selected as the TV input. | Set the TV input to “VIDEO”. | |
|
| The video output setting is incorrect. | Change the setting to [NTSC] or [PAL]. | |
|
|
|
| |
|
| The TV volume is turned down. | Adjust the volume. | |
|
|
|
| |
| The TV image is | The video output setting is incorrect. | Change the setting to [NTSC] or [PAL]. | |
| black and white. |
|
| |
|
|
|
| |
| PC does not | The USB cable is not correctly connected | Set up the camera, and connect the USB cable | |
Connecting to PC | recognize the | to the PC or camera. | correctly. | |
| camera. |
|
| |
|
|
|
| |
Connecting to | Cannot print with | • The USB cable is not correctly | • Set up the camera, and connect the USB cable | |
connected to the printer or camera. | correctly. | |||
printer | PictBridge. | |||
• The printer is not turned on. | • Turn the printer on. | |||
|
| |||
|
|
|
| |
ZOthers |
|
|
|
Matters | Problems | Possible causes | Solutions |
| Nothing happens | Camera malfunction may be caused | Briefly remove the batteries or disconnect the AC |
| temporarily. | power adapter. Then reload the batteries or | |
| when pressing the | ||
| buttons on the |
| reconnect the AC power adapter and try again. |
|
|
| |
Camera operation | camera. | The batteries have run out. | Load new or fully charged batteries. |
| |||
|
|
| |
etc. |
| Camera malfunction may be caused | Briefly remove the batteries or disconnect the AC |
| The camera no | temporarily. | power adapter. Then reload the batteries or |
| longer works |
| reconnect the AC power adapter and try again. If |
| correctly. |
| you think the camera is faulty, contact your |
|
|
| FUJIFILM dealer. |
|
|
|
|
41