86 87

ViewingImages
6
51Press “a” or “b” to select “uPRINT DPOF”.
2Press “c”.
!
When [NOT SET DPOF] appears, the DPOF settings are not
specified.
!
To use DPOF printing, the DPOF settings must be specified
on FinePix Z1 beforehand (P.53).
!
Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
PPICTC T BRIR I DGEG E
PRPR INTNT W I THTH DATED A T E
PRPR INTNT W I T H OUTOU T DATED A T E
PRPR INTNT DPOFD P O F OKO K
0102
6Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.
SHEETSS H E E T S
PR I N T INGIN G
CANCELC A N C E L
111191 91 919
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
4“CHECKING USB” appears and then the menu is
displayed on the LCD monitor.
!
If the menu does not appear, check whether the “ò” USB
MODE setting is “®” PICTBRIDGE.
!
Depending on the printer, some functions are disabled.
CHECC H E C KIK I NGNG USUS B
PI
P I CTBCT B R I DGED G E
When a printer that supports PictBridge is available, images can be printed
by connecting the camera directly to the PictBridge-compatible printer
without using a PC.
!
In PictBridge function, images photographed on other than a camera may not be printed.
6.2.1 Specifying images for printing on the camera
1Press the “w” button for about 1 second to turn
the camera on in Playback mode.
2Select “®” PICTBRIDGE in “ò” USB MODE
in the “˜” SET-UP menu (P.74).
3Turn the camera off.
!
Do not connect to a PC when the “ò” USB MODE setting is
set to “®” PICTBRIDGE. See P.104 if you connect to a PC
by mistake.
1
SETSET
OKOK
ENGLISHEN G L I S H
NTSC
NT S CN T S C
NTSC
1
2
3
PICTBRIDGEPI C T B R I D G E
01
02

6.2

CONNECTING THE CAMERA DIRECTLY TO THE PRINTER

PictBridge FUNCTION

21Plug the AC power adapter connector into the
“DC IN 5V” socket on the cradle and then plug
the AC power adapter into the power outlet.
2Connect the cradle to the printer using the USB
cable (mini-B).
3Set the camera in the cradle.
4Turn the printer on.
!
Plug the camera securely and vertically into the cradle
connecting plug.
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
!
Use an xD-Picture Cardthat was formatted on the camera.
Press the “POWER” button on the cradle.
3