Waterproof and Dustproof

What You Should Remember After Using the Camera

Be sure to wipe any dirt or sand off the waterproof sealing material or its contacting surface. Dirt or sand may scratch the material or the surface, making the camera less resistant to water.

To wash sand, dirt or dust off the camera, rinse it under running tap water or soak it in a bowl of fresh water for 2 or 3 minutes.

Do not use any soapy water, mild detergents, alcohol or similar liquids to clean the camera. They may make the camera less resistant to water.

After using the camera, wipe any water or dirt off the camera with a dry cloth, close the battery-chamber cover securely, and then soak the camera in fresh water for 10 minutes. Next, dry the camera completely.

Storage and Care

Do not leave the camera in a location where the temperature is 40°C (104°F) or higher, or 0°C (32°F) or lower.

The waterproof sealing material is replaceable at cost. The material should be replaced once a year to maintain the camera’s water resistance. For details, contact the store where you purchased the camera, or our Repair Service.

vii