8
replacing the light bulb
Two 50W halogen light bulbs can be installed in this range hood.
Prior to replacing the light bulb, purchase a halogen light bulb (PAR20 bulb, in the base
diameter 26mm: medium base), rated 120V - 50W or below.
1
To remove the light bulb, turn it counter-clockwise. Then, replace the light bulb with a
new one.

NOTE: When replacing the bulb, wait until it has cooled off before removing, or you may

burn your hand.

To remove the light bulb
To install the light bulb

re-assembling

1
Filter
Place the filter in the groove, hold it
upward and turn the knob clockwise to
fix it securely.
2
Rectifier Baffle Panel
With holding the rectifier baffle panel
by both hands, place it on the catches.
Push the panel upward and slide it to
engage the keyholes with 2 screws,
then tighten the screws to fix the
panel firmly.

NOTE: Make sure that the rectifier baffle

panel and filters are fixed in the

appropriate positions correctly.

Knob
Filter