Fujitsu 461V FA !

Color monitor 461V FA

8 - English A26361-K708-Z100-2-5E19

Before you set up your equipment you should select a suitable position for working at the monitor.

Please observe the following advises when installing a video workstation.

Window

permissible

reachingsector

600mm

edgeof desk

permissible

reachingsector

600mm

Avoid direct and reflected glare. Avoid glare from electric

lighting. Position the keyboard where it

is easiest to reach.

30°

60°

0°

60°

0°

permissibleviewing sector

preferableviewing sector

permissible

viewingsector approx.90°

and

approx.90°

Position the monitor for

optimum viewing. The viewing

distance to the monitor should

be approximately 50 cm.

Keep ventilated areas clear. Remember to maintain correct

posture.

Depending on the situation, the use of a swivel arm or wall bracket (VESA FPMPMI), which are

available from specialised dealers, may be advisable. For this purpose the monitor base must be

removed beforehand as described in chapter "Removing the monitor base".

!Please note the information provided in the "Safety" section in the chapter "Important

notes" at the beginning of this manual.

CE conformance and optimum picture quality are guaranteed only if you use the data

cable supplied.

Do not cover the ventilation openings of the monitor.

The computer power plug must be pulled!

Ê Be sure that the monitor and the computer are switched off.