OPERATION
Energy save
ENERGY
SAVE
Press the ENERGY SAVE button to start or stop the
For details on the function, refer to page 9.
Room temperature sensor selection
THERMO
SENSOR
Indoor unit
Press the THERMO SENSOR button to select whether the room temperature is detected at the indoor unit (remote sensor) or the remote controller.
When the thermo sensor display appears, the room temperature is detected at the remote controller.
NOTES
•This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service personnel when using this function.
•If this function is locked, the location where the room temperature is detected cannot be changed and the 
mark flashes when the THERMO SENSOR button is pushed.
Part lock function
DAY
CLOCK ADJUST | DAY OFF |
SET BACK
DELETE 
SET
Press the DAY (DAY OFF) button and SET button simulta- neously for 2 seconds or more to activate the part lock function and lock all of the buttons on the remote con- troller except the Start/Stop button, Set Temperature but- tons, Master Control button, and Fan Control button. Press the buttons again for 2 seconds or more to deactivate the part lock function.
When the part lock function is activated, the 
mark appears. If any button is pressed during the part lock, the PL display flashes.
