Fujitsu ASU18CL, AOU18CL Adjusting The Direction Of Air Circulation, En-9, Press the SET button R

Models: ASU18CL AOU18CL

1 19
Download 19 pages 15.04 Kb
Page 12
Image 12
ADJUSTING THE DIRECTION OF AIR CIRCULATION

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Vertical (up-down) direction of airflow is adjusted by pressing the Remote Control Unit’s SET button. Horizontal (right-left) airflow direction is adjusted manually, by moving the Air Flow Direction Louvers.

Whenever making horizontal airflow adjustments, start air conditioner operation and be sure that the vertical air direction louvers are stopped.

Vertical Air Direction Adjustment

Press the SET button (Fig. 6 R).

Each time the button is pressed, the air direction range will change as follows:

RDANGER!

Never place fingers or foreign objects in- side the outlet ports, since the internal fan operates at high speed and could cause personal injury.

1 Vertical Air Direction AdjustmentPress the SET button (Fig. 6 R). 2 Types of Air flow Direction Setting:Right-Left Adjustment 3 En-9Manual background 4 Manual backgroundManual background 5 Manual backgroundManual background 6 Manual backgroundManual background 7

Types of Air flow Direction Setting:

1,2,3 : During Cooling/Dry modes

1,2,3,4,5,6,7 : During FAN mode

The Remote Control Unit’s display does

 

not change.

1

 

2

 

3

4

5

6

7

Use the air direction adjustments within the ranges shown above.

The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.

During Cooling/Dry/FAN mode : Horizontal flow 1

During AUTO mode operation, for the first minute after beginning operation, airflow will be horizontal 1; the air direction cannot be adjusted during this pe- riod.

Always use the Remote Control Unit’s SET button to adjust the vertical airflow louvers. Attempting to move them manually could result in improper op- eration; in this case, stop operation and restart. The louvers should begin to operate properly again.

During use of the Cooling and Dry modes, do not set the Air Flow Direc- tion Louvers in the range 4 - 7 for long periods of time, since water vapor may condense near the outlet louvers and drops of water may drip from the air conditioner. During the Cooling and Dry modes, if the Air Flow Direction Louvers are left in the range 4 - 7 for more than 30 minutes, they will auto- matically return to position 3.

When used in a room with infants, chil- dren, elderly or sick persons, the air direction and room temperature should be considered carefully when making settings.

Right-Left Adjustment

Adjust the Right-Left louvers.

Move the Right-Left louvers to adjust air flow in the direction you prefer.

Right-Left Louvers

RDANGER!

When adjusting the Right-Left Louvers, it is necessary to stop the Air-Conditioner first and make sure that it stops completely before adjusting the direction.

knob

knob(three places)

En-9

05M150_9315255020-01_En

9

2005.12.15, 10:56

Page 12
Image 12
Fujitsu ASU18CL, AOU18CL Adjusting The Direction Of Air Circulation, En-9, Vertical Air Direction Adjustment