Fujitsu B24W-5 manual Troubleshooting, Having this problem? Check the following points

Troubleshooting

Troubleshooting

Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer.

If you are unable to solve the problem, please inform our help desk.

Having this problem?	Check the following points:
No screen display	► Check whether the ON/OFF switch on the
	monitor is switched on.
	► Check whether the power cable on the
	monitor is connected correctly.
	► Check whether the computer is switched on.
No screen display	► Check whether the computer is switched on.
Power indicator is lit	► Check whether the data cable for the
	monitor is correctly attached to the monitor
	port on the computer.
	► Press any key on the computer keyboard.
	The computer may be in power saving
	mode.
	► Alter the brightness and/or contrast until you
	get a picture.
Message: No Signal	► Check whether the data cable for the
	monitor is correctly attached to the monitor
	port on the computer.
	► Check whether the computer is switched on.
Message: Frequency out of range:## kHz	The input signal (horizontal frequency and
/ ## HzPlease change the display mode	refresh rate) at the displayed input does not
to 1920 x 1200 with 60 Hz	correspond to the technical data for the monitor.
	► Adjust the video frequency range using the
	computer software (see documentation for
	the computer or display adapter).
	► Set a different screen resolution using the
	computer software (see documentation for
	the computer or display adapter).
Picture position not correct	The monitor recognises an undefined mode (see
	chapter "Technical data", Page 25).
	► Press the		button to perform
		EXIT / AUTO
	auto-adjustment of the screen.
Picture is shaking	► Check whether the data cable for the
	monitor is correctly attached to the monitor
	port on the computer.
	► Press the		button to perform
		EXIT / AUTO
	auto-adjustment of the screen.
Picture is wrongly adjusted	► Press the	SELECT / MENU		button to
	activate the Factory Recall function.
	The Auto Processing message appears.

22 A26361-K1334-Z220-1-7619, edition 1