Fujitsu B3000 Exiting from Main Menu

7

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to

another menu. If you wish to exit from the setup utility, press the [Esc] key, use the cursor keys to go to the Exit menu, or

press [F10] to exit and save. If you wish to move to another menu, use the cursor keys.

Heads: nA number between

1 and 16 –— This item is active only when Hard Disk is selected a s type. You can

change the value by incrementing (pressing the [Spacebar]), by typing

in the number, or using the “+” and “-” keys.

Sectors: nA number between

0 and 63 –— This item is active only when Hard Disk is selected a s type. You can

change the value by incrementing (pressing the [Spacebar]), by typing

in the number, or using the “+” and “-” keys.

Maximum

Capacity:

nDisplay only –— Displays the maximum capacity of the drive calculated from the

parameters of the hard disk when Auto is selected and the type is iden-

tified as hard disk.

Multi-Sector

Transfers:

nDisabled

n2 Sectors

n4 Sectors

n8 Sectors

n16 Sectors

[16 Sectors] This option cannot be changed when Auto is selected. Specify the

number of sectors per block for multiple sector transfer.

LBA Mode

Control:

nDisabled

nEnabled

[Enabled] Enables or disables logical Block Addressing in place of Cylinder, Head,

Sector addressing. This option cannot be changed when Auto is

selected.

Transfer Mode: nStandard

nFast PIO 1

nFast PIO 2

nFast PIO 3

nFast PIO 4

nMultiword DMA 1

nMultiword DMA 2

[Multiword

DMA 2] Selects the method for moving data to/from the drive. Autotype the

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected.

Ultra DMA

Mode:

nDisabled

nMode 0

nMode 1

nMode 2

nMode 3

nMode 4

nMode 5

[Mode 5] Selects the method for moving data to/from the drive. Autotype the

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected.

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field Options Default Description

Main Menu

Contents

Main B Series BIOS BIOS SETUP UTILITY Entering the BIOS Setup Utility Navigating through the Setup Utility Entering the Setup Utility After a Configuration Change or System Failure Page MAIN MENU SETTING STANDARD SYSTEM PARAMETERS Table 1: Fields, Options and Defaults for the Main Menu Primary Master Submenu of the Main Menu The Primary Master submenu identifies what ATA/ ATAPI devices are installed. Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu Exiting from Main Menu Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description ADVANCED MENU SETTING DEVICE FEATURE CONTROLS Table 3: Fields, Options and Defaults for the Advanced Menu Serial/Parallel Port Configurations Submenu of the Advanced Menu All I/O addresses in Table 4 are in hexadecimal. Page Keyboard/Mouse Features Submenu of the Advanced Menu Table 5: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. Table 6: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configurations submenu allows the user to configure other internal devices. Table 7: Fields, Options and Defaults for Internal Device Configurations Submenu of Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features submenu configures certain features of the CPU in the system. Table 8: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu USB Features Submenu of the Advanced Menu The USB Features submenu configures the USB capabilities of the system. Table 9: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu Miscellaneous Features Submenu of the Advanced Menu Table 10: Fields, Options and Defaults for the Miscellaneous Features Submenu of the Advanced Menu Event Logging Submenu of the Advanced Menu The Event Logging submenu is for setting up the logs for DMI event logging. Table 11: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu SECURITY MENU SETTING THE SECURITY FEATURES Page Exiting from the Security Menu Hard Disk Security Submenu of the Security Menu The Hard Disk Security submenu is for configuring hard disk security features. Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu Owner Information Submenu of the Security Menu The Owner Information submenu is for setting owner information. Table 14: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE Table 15: Fields, Options and Defaults for the Boot Menu Boot Device Priority Submenu of the Boot Menu Exiting from Boot Menu Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION Table 17: Fields, Options and Defaults for the Info Menu EXIT MENU LEAVING THE SETUP UTILITY Table 18: Fields, Options and Defaults for the Exit Menu