B S e r i e s B I O S
1.When you turn on or restart the computer there is a beep and/or the following message appears on the screen:
Error message - please run SETUP program Press <F1> key to continue, <F2> to run SETUP
2.If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key.
•If your notebook emits a series of beeps that sounds like a code and the display is blank, refer to the Troubleshooting Section of the system User’s Guide. The Troubleshooting Section includes a list of error messages and their meanings.
•If your data security settings require it, you may be asked for a password before the operating system will be loaded.
3.If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] key.
4.When the setup utility starts with a fault present, the system displays the following message:
Warning! Error message [Continue]
5.Press any key to enter the setup utility. The system will then display the Main Menu with current parameters values.
3
