Manuals / Fujitsu / Computer Equipment / Computer Drive

Fujitsu C141-E280 dimensions Connections with Host System, Device connector, 7 Connector locations

Models: C141-E280

1 12

Download 12 pages 28.72 Kb

Page 9

Image 9

3.3 Connections with Host System

3.3.1 Device connector

The disk drive has the SATA interface connectors listed below for connecting external devices. Figure 3.7 shows the locations of these connectors and terminals.

SATA interface and power

connectors

PCA

Figure 3.7 Connector locations

C141-E280

3-9

Page 9

Image 9

Fujitsu C141-E280 dimensions Connections with Host System, Device connector, 7 Connector locations

Contents

CHAPTER 3 Installation Conditions 3.1 Dimensions 3.2 Mounting 3.3 Connections with Host SystemC141-E280 3.1 Dimensions Installation ConditionsFigure 3.1 Dimensions 3.2 Mounting 3.2 Mounting3 Limitation of mounting Figure 3.2 Mounting frame structureInstallation Conditions 3.2 Mounting Figure 3.3 Location of breatherLocating of breather hole is shown as Figure C141-E280Figure 3.4 Surface cover temperature measurement points 4 Ambient temperatureTable 3.1 Surface temperature measurement points and standard values Installation ConditionsFigure 3.5 Service area 5 Service area6 Handling cautions 3.2 MountingInstallation Conditions Figure 3.6 Handling cautionsInstallation General notesFigure 3.7 Connector locations 3.3.1 Device connector3.3 Connections with Host System 3.3 Connections with Host System3.3.3 Connector specifications for host system 3.3.2 Signal segment and power supply segmentFigure 3.8 Power supply pins CN1 Installation Conditions3.3.4 SATA interface cable connection 3.3.5 Note about SATA interface cable connection3.3 Connections with Host System This page is intentionally left blank