Supplement for Embedded MegaRAID SATA User’s Guide

zUpdating Drivers (Windows Server 2008 – Full installation)

The update procedure for the device driver using Windows Server 2008 is as follows;

1Log on to Windows with Administrator privileges.

2Insert the “Array Controller Document & Tool CD” into a CD/DVD drive.

3Select [Diagnostics] -> [Device Manger] from [Server Manger].

4Double-click [Storage controllers]. The Controllers list appears.

5Double-click one of the below;

・Starting with “LSI Logic Embedded MegaRAID SATA…” ・Starting with “LSI Embedded MegaRAID SATA…”

6Select [Driver] tab and click [Update Driver]. The [Update Driver Software] window appears.

7Click [Browse my computer for driver software].

8Click [Let me pick from a list of device drivers on my computer].

9Click [Have Disk].

10Click [Browse] button and select the file as follows; ・For Windows Server 2008

[CD/DVD Drive]:\Drivers\MegaSR\W2K8\MegaSR.INF

・For Windows Server 2008 x64

[CD/DVD Drive]:\Drivers\MegaSR\W2K8x64\MegaSR.INF

11Click [OK]. Confirm that the driver is displayed in the list and click [Next] afterwards.

12Upon completion of the Driver update, click [Close] to exit from the [Update Driver Software] window.

13Click [OK] to close the [Properties] window.

14If more than one array controllers are installed, update all the device drivers. Repeat the Step 5 to 13 until all device drivers are updated.

15When all device drivers are updated, remove the “Array Controller Document & Tool CD” from CD/DVD drive.

16Restart the system.

5 / 13